The car emergency starter power supply is a multi-functional mobile power, it’s a bit similar to our mobile phone power bank. When the car loses power, it is very convenient to use this power supply in an emergency, so it can be said to be one of the must-have items for outdoor travel. Since the car emergency starter is so easy to use, how to use it correctly?
1.At the first, you need to find the position of the car battery, and then connect the jump starter harness to the car battery. Generally, the positive pole of the battery is connected with a red clip, and the negative pole of the battery is holded by the black clip.
2.Secondly, after clamping well, turn on the power switch of the car jump starter, and then insert the connector of the battery clip into the interface of the car jump starter. The important thing is to ensure that the power of the jump starter is in the “OFF” state, then turn the power switch to the “ON” state.
3. Finally, after doing these works, check again whether the positive pole and negative pole are connected correctly and whether the clamp is clamped. Finally, you can get on the car and start the vehicle. It is best to remove the clamps within 30 seconds after the vehicle starts to avoid fires caused by heat and other reasons.
Post time: Nov-26-2022
